Tired of unauthorized vehicles clogging up your parking lot? Say goodbye to your parking woes with the tire killer. This innovative device is designed to puncture the tires of any vehicle that attempts to enter your premises without permission, ensuring that only authorized vehicles can access your property.
Our Tyre Killers are made from top-quality materials, ensuring they are durable and able to withstand even the toughest conditions. They are designed to puncture the tyres of any vehicle that tries to force its way through, effectively bringing it to a standstill.
The uses of Tyre Killer are numerous, ranging from private parking lots, restricted military areas, government buildings, and even airports. This versatile product can also be used to control the flow of traffic in a specific direction, such as in one-way streets or tollbooths.
A. Place the equipment box on the flat road surface with the traction device facing the unfolding direction.
B. Open the link latches on both sides of the box.
C. Press the red power switch to turn on the power to the traction unit.
D. Pull out the remote control antenna, press and hold the “forward” button (upper button) of the remote control, and unfold the belt to the desired length release button. If you need to close the belt and press the “back” button (down button), Release the button after closing.
A. Due to the sharpness of the car nails, please be careful during operation and maintenance to prevent stab wounds and scratches.
B. When laying out, try to choose a road section with a smooth road surface.
C. There must be a special person in the vicinity of the nail belt to avoid accidental injury to pedestrians and vehicles.
D. Make sure the power supply is sufficient and the remote control is normal before use.
E. Be sure to turn off the power after use.
F. After the equipment standby time exceeds 100 hours or if it is used more than 50 times on the same day, it must be charged to avoid the equipment being unable to be used normally due to excessive battery discharge.
G. When the remote control indicator light is red, it indicates that the remote control battery is low. It needs to be replaced in time, otherwise, it will affect the normal operation of the equipment.
E. When closing the box, press the red power switch to turn off the power.
F. Raise the box, match the traction device to the nail belt box interface, and press the two side locks.
G. If it cannot be operated remotely because of electrical and mechanical failure, after the lock is opened, the belt can be pulled out by the hand-held traction device and the layout can be completed manually.
H. Charging is carried out in constant voltage and turbulent mode. It will not cause damage to the equipment battery due to long-term charging. The equipment can be used normally after 2-3 hours of charging. The equipment is idle - it takes two hours to charge for more than one month.
I. It is strictly forbidden to give the reverse direction travel command suddenly during remote control travel, otherwise, the circuit or motor will be damaged due to excessive instantaneous current.
J. It is strictly forbidden for any person to appear within 20 meters of the direction of the inertia of the intercepted vehicle and the nail belt to avoid injury to the personnel caused by the loss of control after the vehicle is broken.
K. There is a delay function in the equipment circuit, and the remote control operator has the proper advance amount.
L. Do not drop, bump or press the equipment box during use to avoid damage to the parts.
So, what are you waiting for? Say goodbye to unauthorized parking and hello to Tyre Killer! Contact us today to learn more about our products and customization options.
Please inquiry us if you have any qauestions about our products.
You also can contact us by email at ricj@cd-ricj.com